The Briggs brand of hosereels is based on the tried and tested Ocmis range, imported and adapted especially for the UK market.
Each machine goes through a rigorous assembly, pre delivery inspection and testing program prior to despatch to ensure trouble free commissioning and ease of operation.
Each of the highly efficient turbine powered units is packed with advanced features and the standard specification of all models is high. Even the smallest machines have hydraulic lifting for the trolley and are fitted with the latest Program Rain 10-12 controller.
Hosereels are available in sizes to suit every farm, from 63/200 to 125/750. See technical spec for full model list.
Numerous options are available including 4 wheel chassis, fully galvanised drum, full hydraulic package and remote SMS monitoring and control. (see 'Options' tab above)
Briggs Irrigation can supply a range of different size hosereels with rainguns or booms for irrigating large areas of turf.
Hosereels, booms and gun trolleys are supplied with turf wheels, hydraulic pick up of trolley (or boom), Program Rain 10-12 controller and vari-angle raingun.
Program Rain 10-12 controller.
Hydraulic device to rotate the drum in line with the direction of planting.
Standard on machines VR4 and larger.
Hydraulic version of the standard mechanical jack.
Standard on machines VR7 and larger.
More stability and lower ground pressure are available with this option.
Available on all models from R4/1 and larger.
The hosereel pipe remains in the wheeling which eliminates damage to the crop and reduces the power required to pull out the hose.
Standard on all gun trolleys and complete with pressure gauge and range of nozzles. In windy conditions reducing the raingun angle can increase the throw of the raingun significantly.
This is required for pulling out offset gun trolleys where the pulling point is behind the tractor wheel. There is also a large pin which locates in the hosereel drawbar for moving the hosereel between runs.
Can be supplied in 3, 3.5, & 4" size with male/female Bauer type couplings. There is an easily removable high capacity cone filter inside the housing.
Drawbar mounted compressor designed to exhaust the water from the PE hose to reduce the weight of the hosereel for transport and make pulling out the PE hose easier.
Flashing red light which is set to flash when the PE hose is pulled out within 20 metres of its full length to warn the operator to stop pulling.
For use in the following situations:
1. Where the pressure is not sufficient to operate a turbine.
2. When very high retraction speeds are required.
3. When very low flow rates are required.
4. For irrigating dirty water or slurry which would cause blockages in a turbine drive machine.
The Hosereel SMS Control and Alert system has been developed to give growers more efficient use of their irrigation systems by avoiding down time. On modern farms a lot of land may be situated many miles from the farm base and this system which is designed, developed and built in the UK will alert the operator of a problem and enables remote interrogation and control of the hosereel irrigator.
The system is designed to be used from mobile phone and can be fitted to any new or existing machine with the Program Rain 10-12 Control panel.
The system is designed to be as simple as possible for the operator. The only information required is the phone number of the unit and some simple text commands.
Fully galvanised drum as well as chassis.
Tractor operated brakes optional on VR4, VR5, VR7, VR8.
|
Machine Dimensions (cm) |
|||||
|
Model |
Chassis Length A |
Total Height B |
Wheel Track E |
Machine width F |
Standard tyre size |
|
R1/1 |
310 |
230 |
175 |
170 |
10/8.0-12 |
|
R2 |
340 |
265 |
195 |
193 |
10/8.0-12 |
|
VR3 |
310 |
298 |
214 |
214 |
10.0/75-15.3 |
|
VR4 |
334 |
327 |
224 |
232 |
10.0/75-15.3 |
|
VR5 |
359 |
366 |
230 |
248 |
400/60-15.5 |
|
VR7 |
364 |
403 |
240 |
245 |
400/60-15.5 |
|
VR8 |
520 |
435 |
255 |
240 |
400/60-15.5 |
|
VIR7 |
436 |
395 |
282 |
260 |
400/60-15.5 |
|
VIR8 |
470 |
430 |
285 |
218 |
400/60-15.5 |
|
VIR10 |
530 |
430 |
296 |
245 |
400/60-15.5 |
Briggs R1/1 Hosereel Data
|
Machine Size Pipe OD (mm) x Length (m) |
PE Pipe Thickness (mm) |
Raingun Lane Spacing (m) |
Flow Range (m³/hr) |
Hose Finish Location (diagram 1) |
Connection Pressure (Bar) |
|
63/200 63/250 63/300 70/270 75/220 75/250 82/160 |
4.7 4.7 4.7 5.2 6.5 6.5 6.0 |
48→58 48→54 48→54 40→66 50→72 50→72 50→80 |
15→31 15→28 15→24 17→34 20→40 20→40 20→50 |
D B E E B D B |
5.6→10.0 6.0→10.0 6.5→10.0 6.0→10.0 6.0→10.0 6.0→10.0 6.0→10.0 |
Briggs R2 Hosereel Data
|
Machine Size Pipe OD (mm) x Length (m) |
PE Pipe Thickness (mm) |
Raingun Lane Spacing (m) |
Flow Range (m³/hr) |
Hose Finish Location (diagram 1) |
Connection Pressure (Bar) |
|
70/350 75/300 75/330 82/270 82/300 90/200 |
5.2 6.0 6.0 7.5 7.5 8.2 |
40→66 40→69 40→69 50→78 50→74 50→80 |
15→27 15→33 15→33 18→48 18→48 23→62 |
E C E B D A |
6.5→10.0 6.0→10.0 6.0→10.0 6.0→10.0 6.5→10.0 5.5→10.0 |
Briggs VR3 Hosereel Data
|
Machine Size Pipe OD (mm) x Length (m) |
PE Pipe Thickness (mm) |
Raingun Lane Spacing (m) |
Flow Range (m³/hr) |
Hose Finish Location (diagram 1) |
Connection Pressure (Bar) |
|
82/380 82/400 82/470 90/350 90/380 100/300 100/320 |
7.5 7.5 7.5 8.2 8.2 9.1 9.1 |
50→67 50→67 50→67 50→74 50→74 50→77 50→77 |
18→38 18→38 23→58 23→54 23→54 25→76 25→76 |
C D C C E B C |
6.5→10.0 6.5→10.0 6.5→10.0 5.5→10.0 5.5→10.0 5.5→10.0 5.5→10.0 |
Briggs VR4 Hosereel Data
|
Machine Size Pipe OD (mm) x Length (m) |
PE Pipe Thickness (mm) |
Raingun Lane Spacing (m) |
Flow Range (m³/hr) |
Hose Finish Location (diagram 1) |
Connection Pressure (Bar) |
|
82/430 90/300 90/350 90/380 90/400 90/450 90/500 100/350 100/390 |
7.5 8.2 8.2 8.2 8.2 8.2 8.2 9.1 9.1 |
50→67 50→74 50→74 50→74 50→74 50→74 50→74 50→86 50→83 |
18→38 23→54 23→54 23→54 23→54 23→54 23→54 25→76 25→72 |
C C A B C E C C E |
6.5→10.0 6.0→10.0 6.0→10.0 6.0→10.0 6.0→10.0 6.0→10.0 6.0→10.0 5.5→10.0 5.5→10.0 |
Briggs VR5 Hosereel Data
|
Machine Size Pipe OD (mm) x Length (m) |
PE Pipe Thickness (mm) |
Raingun Lane Spacing (m) |
Flow Range (m³/hr) |
Hose Finish Location (diagram 1) |
Connection Pressure (Bar) |
|
100/400 100/450 100/470 100/500 110/420 110/450 110/470 120/400 125/350 125/380 |
9.1 9.1 9.1 9.1 10.0 10.0 10.0 10.4 10.4 10.4 |
50→77 50→77 50→77 50→77 60→86 60→86 60→86 60→101 60→101 60→101 |
35→54 35→54 35→54 35→54 40→76 40→76 40→76 40→101 40→101 40→101 |
A B C D C D E C B D |
6.0→10.0 6.0→10.0 6.0→10.0 6.0→10.0 6.0→10.0 6.0→10.0 6.0→10.0 6.0→10.0 6.0→10.0 6.0→10.0 |
Briggs VR7 & VIR7 Hosereel Data
|
Machine Size Pipe OD (mm) x Length (m) |
PE Pipe Thickness (mm) |
Raingun Lane Spacing (m) |
Flow Range (m³/hr) |
Hose Finish Location (diagram 1) |
Connection Pressure (Bar) |
|
100/600 110/500 110/530 110/550 110/580 110/600 120/540 125/440 125/500 |
10.0 10.0 10.0 10.0 11 11 11.4 10.4 11.4 |
60→83 60→83 60→80 60→80 60→80 60→80 60→101 60→101 60→101 |
40→50 40→67 40→62 40→62 40→62 40→62 40→101 40→101 40→101 |
C E D C B A A E B |
6.0→10.0 6.0→10.0 6.0→10.0 6.0→10.0 6.0→10.0 6.0→10.0 6.0→10.0 6.0→10.0 6.0→10.0 |
Briggs VR8 & VIR8 Hosereel Data
|
Machine Size Pipe OD (mm) x Length (m) |
PE Pipe Thickness (mm) |
Raingun Lane Spacing (m) |
Flow Range (m³/hr) |
Hose Finish Location (diagram 1) |
Connection Pressure (Bar) |
|
110/650 110/680 110/700 120/650 125/600 140/470 |
11 11 11 12 13 11.5 |
60→77 60→77 60→77 60→85 60→91 60→106 |
40→60 40→60 40→60 40→72 40→82 40→120 |
C D E E D B |
6.0→10.0 6.0→10.0 6.0→10.0 6.0→10.0 6.0→10.0 6.0→10.0 |
Briggs VR10 & VIR10 Hosereel Data
|
Machine Size Pipe OD (mm) x Length (m) |
PE Pipe Thickness (mm) |
Raingun Lane Spacing (m) |
Flow Range (m³/hr) |
Hose Finish Location (diagram 1) |
Connection Pressure (Bar) |
|
125/750 140/600 |
14 13 |
60→90 60→94 |
40→72 40→100 |
B D |
6.0→10.0 6.0→10.0 |
